Ceper Façade Plaster
About the Product
Ceper façade plaster is a cement- and perlite-based plaster with lightweight fillers and high hydraulic polymerization, enriched with additives that expand its application possibilities. The composition is frost-resistant, durable against water and external environmental factors, and features excellent properties. It is strong, elastic, and crack-resistant. Complies with GOST 28013-98 standard.
Applications
-
For plastering concrete surfaces of walls and ceilings;
-
For laying and plastering surfaces of brick, stone, block, and aerated block materials;
-
Suitable for both machine-applied and manual plastering of walls and ceilings.
Advantages
-
Resistant to water and humidity;
-
A clean skim coat can be applied over plastered surfaces, saving repair costs;
-
Plastered surfaces remain warm in winter and cool in summer;
-
When applied using a plastering machine, it facilitates the work of the craftsman and allows fast plastering of large surface areas.
Consumption
-
For plastering 1 m² of surface with 8–10 mm thickness: 12–14 kg of plaster mix;
-
When machine-applied, 25 kg of packaged plaster mix can cover approximately 2 m² of surface.
Storage and Shelf Life
-
Unopened packaging can be stored for 12 months in dry conditions, stacked no more than 10 layers high.
Precautions
-
As the plaster contains additives, in case of contact with skin or eyes, rinse immediately with running water;
-
Do not add any additives not specified in the instructions;
-
The above data were obtained under laboratory conditions at +23°C ± 2°C and 50% ± 5% humidity. Actual performance may vary depending on conditions.
Warranty and Technical Support
-
Technical specifications are based on scientific and practical knowledge;
-
Compliance with state standards is the responsibility of Fab Production;
-
Apart from works conducted by Fab Production, the company is not responsible for issues arising from improper use;
-
The company reserves the right to make changes according to scientific and technical progress.
-
For technical support and additional information, contact Fab Production.
Color: Grey
Operating Temperature: -50°C to +300°C
Water/Dry Mix Ratio: 4.5 L water / 25 kg dry mix
Working Time: 120 minutes
Minimum Application Thickness: 8–10 mm
Maximum Application Thickness: 35 mm
Tensile Strength: On bending: unspecified; On compression: 2–5 N/mm²
Density: Dry mix: 1200 kg/m³; Ready mix: 1700 kg/m³
Packaging: 25 kg bags made of 2–3 layers of kraft paper and 1 layer of polyethylene
